Skip to main content Skip to search Skip to primary navigation

Search

Search Building Performance

Applying filters will narrow down your search results

Search the site using smart filters

Show me

Clear search

Search results

Showing 411-420 of 1000 results for BRANZ-CM-1002-Rev 1​
Sorted by relevancy

2014/002: Regarding the issuing of a notice to fix for repairs to a house

Determination 2014/002 [PDF 299 KB] Date issued: 22 January 2014

About this document

Primary Building Code clause:
E2 - External Moisture
Also related to:
B - StabilityB1 - StructureE - MoistureB2 - Durability
Primary topic:
Weathertightness (remedial work)
Council:
Tauranga City Council
Section of the Building Act:
Schedule 1
Show details

2011/041: Whether internal alterations to an attached garage is exempt from the need for a building consent under Schedule 1 of the Building Act

N/A
Determination 2011/041 [PDF 86 KB] Date issued: 2 May 2011

About this document

Primary topic:
Building Act Interpretation
Council:
Tasman District Council
Section of the Building Act:
Schedule 1
Show details

2012/038: The application of certain conditions to an exemption issued under paragraph (k) of Schedule 1 in respect of an effluent tank

N/A
Determination 2012/038 [PDF 80 KB] Date issued: 21 May 2012

About this document

Primary topic:
Building controls process
Council:
Selwyn District Council
Section of the Building Act:
Schedule 1
Show details

CodeMark Scheme Rules

Scheme rules for CodeMark New Zealand scheme parties. This may also be of interest to manufacturers or suppliers of building products considering CodeMark certification.
Building Code compliance > Product assurance and certification schemes > CodeMark > CodeMark Scheme Rules

1st edition, amendment 2

G5 Interior environment – G5/AS1. First edition, Amendment 2.
Building Code compliance > G Services and facilities > G5 Interior environment > Acceptable Solutions & Verification Methods > 1st edition, amendment 2

Concrete tile roofs: Amendment 5 to E2/AS1

Guidance on wind speed and pressure requirements with regards to concrete tile roof underlays and underlay support.
Building Code compliance > E Moisture > E2 External moisture > Concrete tile roofs: Amendment 5 to E2/AS1

2024/006: The refusal to issue a certificate of acceptance for building work associated with a dwelling

This determination considers the authority's refusal to issue a certificate of acceptance for building work associated with a dwelling, that was carried out without building consent. The authority considered that Building Code clauses B1 Structure, B2 Durability, E2 External Moisture, G2 Laundering, G9 Electricity, G12 Water Supplies and H1 Energy Efficiency were not met. The determination considers the reasons for refusal set out in the authority’s refusal letter and subsequent report.
Determination 2024/006 [PDF 1.8 MB] Date issued: 27 February 2024

About this document

Also related to:
B1 - StructureG9 - ElectricityH1 - Energy EfficiencyE2 - External MoistureG2 - LaunderingG12 - Water suppliesB2 - Durability
Primary topic:
Compliance
Council:
Auckland Council
Section of the Building Act:
40,96,97,99a
Show details

1st edition, amendment 6

All of the Acceptable Solutions and Verification Methods relating to G9 are contained in one document. Defines the terms ‘electrical installation’, ‘electrical supply stream’ and ‘essential service’. G9/VM1 references the documents that can be accepted as verifying compliance with G9, including within domestic dwellings. G9/AS1 provides a design solution for accessible light switches and plug sockets.  Cited content in this document can be found on the Building CodeHub website.
Building Code compliance > G Services and facilities > G9 Electricity > Acceptable Solutions & Verification Methods > 1st edition, amendment 6

13. Support structures

This section includes construction of retaining walls and small pipe support structures for water only on private land.
Projects & consents > Planning a successful build > Scope and design > Check if you need consents > Building work that doesn't need a building consent > Exempt building work guidance > 13. Support structures

E3/AS2, 1st edition

Building Code compliance > E Moisture > E3 Internal moisture > Acceptable Solutions & Verification Methods > E3/AS2, 1st edition
Top

This information is published by the Ministry of Business, Innovation and Employment’s Chief Executive. It is a general guide only and, if used, does not relieve any person of the obligation to consider any matter to which the information relates according to the circumstances of the particular case. Expert advice may be required in specific circumstances. Where this information relates to assisting people:

Print this page (recommended)

This will print only the current page of this guidance document.

Print this page

Cancel