Previous determinations

The authority refused to issue a code compliance certificate for the building work and is seeking determination as to whether the installation of a woodburner (of which the hearth is a necessary element) complies with the Building Code.

This determination considers the authority's decision to issue a code compliance certificate for a woodburner.

This determinaton considers whether the authority was correct to refuse a building consent for alterations to an existing school building. It considers the reasons for refusing to grant a building consent under section 50 of the Building Act, and what is as nearly as is reasonably practicable under section 112 of the Building Act, specifically in relation to installing a fire sprinkler system.

Note: This determination was subject to appeal. The Determination was confirmed and the appeal was dismissed. Read the appeal judgement.

This determination considers the issue of a building consent and code compliance certificate for a motel in respect of a fire alarm system. The matter turns on whether the building work as approved in the building consent complied with Clauses C2 Means of escape from fire and F7 Warning systems, and whether the construction of the motel without a fire alarm system being installed met the performance requirements of those clauses when the code compliance certificate was issued.

Note: This determination is subject to clarification

This determination concerns an as-installed solid fuel heater installed without the clearance behind it that was described in the manufacturer’s installation instructions.  The determination considers the compliance of heater and a notice to fix issued in respect of this work.

This determination considers the code-compliance of retrofitted rigid foam insulation board to insulate the walls of an existing house.  The determination considers whether the proposed insulation board will satisfy certain clauses of the Building Code to the extent required by the Building Act.

This determination considers the code compliance of a proposed steel-framed house that uses rigid foam insulation board to insulate the walls and roof: the house was the subject of an application for building consent.  The determination considers whether the insulation board satisfies certain clauses of the Building Code, and also whether the documents submitted in support of the application for building consent were adequate.

N/A