Product certificate register

SOPREMA Waterproofing Membrane Systems are reinforced, double-layer bituminous waterproofing membrane systems, consisting of a cap sheet (DuO, Nova-SK, SOPRASUN and SOPRALENE) used with a basesheet (Soprasun Plus 3, DeboFlex, DeboTack, Soprastick, Nova-SK).

Safe-R Insulation (NZ) Limited Trufill Insulation System is a loose-fill blow-in non-bonded granulated glasswool mineral fibre insulation system. It is blown on-site into building cavity spaces to a nominal density of between 12 kg/m3 and 32 kg/m3. When blown in cavities, the insulation is retained by a transparent Blown Insulation Barrier (BIB), over which the internal lining of the building is installed.

J-Frame is structural Laminated Veneer Lumber (LVL) gauged framing timber produced from Pinus radiata.

J-Frame available sizes are 90x45, 140x45, 190x45, & 240x45 (mm). Two strength grades are produced: J-Frame 8 and J-Frame 11.

Kronospan OSB Barrier is a 9mm untreated oriented strand board (OSB) panel product. Panels are available in sizes:

• 2400 x 1200mm
• 2700 x 1200mm
• 2440 x 1220mm
• 2740 x 1220mm.

The STOPDIGGING! Ground Screw Foundation System comprises ground screws matched to site conditions by static pile testing to determine the screw type, size and depth for installation to achieve the capacity required to meet the design loads.

The STOPDIGGING! Ground Screws are circular hollow sections with a continuously welded helix manufactured from steel that complies with ISO 630 FE360A (High Tensile Steel for Structural Purposes). The ground screws are coated with a hot-dipped galvanised coating that achieve an average of 125 μm zinc cover.

The STOPDIGGING! Ground Screw Foundation System uses the following STOPDIGGING! Products:

• Ground screws: SGU 95 (580 mm to 1600 mm long), SGC 76∅ (865 mm to 3000 mm long), SGC 89∅ (1200mm to 3000mm long)
• Brackets: SGL 145, SGE 125 and SGE 95

The AspirePanel wall panels and AspireSpan roof panels are lightweight, thermally efficient wall and roof panels manufactured in New Zealand. The panels have a polyisocyanurate (PIR) core sandwiched between 0.59 mm layers of galvanised and/or Zincalume steel and with a factory applied Colorsteel finish. The colorsteel finish will depend on the specific exposure zone and use. The panels are supplied in 1,000 mm width, custom lengths and in thicknesses (mm) of 50, 75, 100 & 150. The thickness determines thermal performance and span capability. The panels are supplied with a tongue and groove joint and a lapped corrugation on both edges. The facings are available in the following profiles: Flat smooth profile, Silkline, Mesa and Ribbed indented.

See Specification Guide - Metalcraft PIR Panel V1 (Nov 2019) for ancillary items.

Fuzhou ROPO Aluminium Doors and windows are a range of aluminium allow joiner fitted with double-glazed insulated glass units( IGUs) Products are an Aluminium Hinged Folding Door, Aluminium Tilt and Turn Window (with thermal break), and Aluminium Hinged Door ( with thermal break).

Matters that should be taken into account in the use or application of the building method or product can be found in item 6. Conditions and Limitations of Use Continuation of description can be found in item 10 – Supporting information about Description.

Product brochure/catalogue or models identification numbers: Refer to item 10 for detailed identification information

The Abodo Weatherboard Cladding System consists of weatherboards fixed to cavity battens forming a drained cavity. Weatherboard profiles include Bevelback, Vertical Shiplap, Rusticated and Secret fixing. The weatherboards are available with a smooth dressed face (for a paint finish) or a light band sawn or brushed face (for a stain finish) and manufactured from a range of materials:

• Sand – H3.2 treated radiata pine
• Vulcan – thermally modified radiata pine
• Stratos – Azole treated radiata pine (H3.1)
• Tundra – Douglas fir heart wood

Masons roof underlays are manufactured from synthetic multi-laminate spun-bonded, non-woven polypropylene membranes. This certificate covers the following products:

• VHP Value (125 gsm)
• VHP Strong (140 gsm)
• VHP Ultra (180 gsm)
• VHP Maxi (220 gsm)

These products are described in section 10.

Masons Flashing Tapes are made of three components (film or fabric carrier, adhesive, and a release liner).

This certificate covers the following products:

• 40 Below Window Flashing Tape
• 40 Below Platinum Flashing Tape
• 40 Below Flex Flashing Tape
• Hydro Flashing Tape
• Bayonet BayoWrap Window Sealing Tape

And the following optional accessories for sill flashing:

• CornerGuard
• BayoWrap Corner Guard