Skip to main content Skip to search Skip to primary navigation
Building Performance
Site search

Popular searches

  1. Why contracts are valuable
    Consumer protection measures
  2. Use licensed people for restricted building work
    Choosing the right people for your type of building work
  3. Work that doesn't require a building consent
    Schedule 1 guidance
  4. Post-emergency building assessment
  5. Determinations
    Rulings on building work disputes
  6. E2 External moisture
    Acceptable Solutions and Verification Methods
 
Menu Search

C/AS3, amendment 4


Effective on 1 January 2017 until 31 October 2019

Paragraph 1.1.2: Clarification that an alternative solution or Verification Method can be used for buildings with complex features or specific fire engineering design.

Paragraph 2.3: Scope limitations on Life rating and Property rating are removed.

Paragraph 3.15.5: Door widths clarified.

Paragraph 4.16.12: Location of smoke dampers clarified.

Paragraph 5.5.7: The tabulated method for calculating Unprotected Areas can be used.

Appendix C: Table added enabling Australian and European Standards to be used to determine Group Numbers.

Cited content in this document can be found on the Building CodeHub website.

Top

This information is published by the Ministry of Business, Innovation and Employment’s Chief Executive. It is a general guide only and, if used, does not relieve any person of the obligation to consider any matter to which the information relates according to the circumstances of the particular case. Expert advice may be required in specific circumstances. Where this information relates to assisting people: