Skip to main content Skip to search Skip to primary navigation
Building Performance
Site search

Popular searches

  1. Why contracts are valuable
    Consumer protection measures
  2. Use licensed people for restricted building work
    Choosing the right people for your type of building work
  3. Work that doesn't require a building consent
    Schedule 1 guidance
  4. Post-emergency building assessment
  5. Determinations
    Rulings on building work disputes
  6. E2 External moisture
    Acceptable Solutions and Verification Methods
 
Menu Search

3rd edition, amendment 9


Effective on 14 February 2014 until 30 May 2017

 

Acceptable Solutions and Verification Methods (AS and VMs) were called compliance documents. Some still have the “compliance document” title but the AS or VMs they contain are valid and unaffected by the name change.

All of the Acceptable Solutions and Verification Methods relating to G12 are contained in one document.

  • G12/VM1 provides a Verification Method for the design of water supply systems.
  • G12/AS1 applies to below and above ground piped water supply systems. It details cross connection hazards, backflow prevention, air gap separation, water tanks, flow rates and equipotential/earth bonding.  It includes hot water supply systems, climates subject to freezing and seismic restraint.
  • G12/AS2 applies to solar water heaters installed in or on buildings. 
Top

This information is published by the Ministry of Business, Innovation and Employment’s Chief Executive. It is a general guide only and, if used, does not relieve any person of the obligation to consider any matter to which the information relates according to the circumstances of the particular case. Expert advice may be required in specific circumstances. Where this information relates to assisting people: