Module 3: Identification, assessment and mitigation of liquefaction hazards

All content related to B1 Structure

About this document

  • Published on 29 November 2021
  • Updated on 29 November 2021
  • Of interest to Building consent authorities, Engineers,
  • ISBN: 978-0-947-524-47-0 (Print) / 978-0-947-524-48-7 (Online)

Introduction

Module 3 of the Earthquake Geotechnical Engineering Practice guidelines provides guidance for the identification, assessment and mitigation of liquefaction hazards.

Contents

Developed jointly by MBIE and the New Zealand Geotechnical Society, the module is part of the Earthquake Geotechnical Engineering Practice series and relates specifically to earthquake hazards.

Education

Learn about Module 3 (version 0) in the geotechnical education section. Learning material on Module 3 (verison 1) will be developed soon. 

High level changes in this version include

  • New knowledge and research from the Kaikōura (2016) and Canterbury earthquake (2010-2011) studies have been incorporated throughout the module
  • Updates and additions to
    • Section 3: Soil liquefaction hazard
    • Section 5: Identification and assessment of liquefaction hazards
    • Section 8: Reclaimed land and constructed fills
    • Section 9: Volcanic soils
  • Minor content revisions, clarifications and updates, including consideration and incorporation of relevant existing feedback.

Previous version

View the previous version (Version 0)

Resources

Other resources that are available include:

All guidance documents related to B1 Structure

This information is published by the Ministry of Business, Innovation and Employment’s Chief Executive. It is a general guide only and, if used, does not relieve any person of the obligation to consider any matter to which the information relates according to the circumstances of the particular case. Expert advice may be required in specific circumstances. Where this information relates to assisting people: