Product certificate register

KE KELIT VSH XPress GAS Fittings are manufactured from copper and stainless steel suited for use with stainless steel pipes manufactured in accordance with EN 10312:2002 or, copper pipes that satisfy R250 R290 of EN1057:2006.

COPPERFIX copper tubes are manufactured in accordance with EN1057:2006 + A1:2010. COPPERFIX fittings are manufactured to EN1254:1998. Available copper tube diameters are 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm 88.9mm and 108mm.

The steelFIX Stainless Hot & Cold Pipe & Fittings system is manufactured from 316 and 444 grade stainless steels in accordance with EN 10312:2002 and AS/NZS4020:2018 (for potable water). The steelFIX pipes and fittings come in a range of sizes to suit the design requirements.

KE KELIT KELOX Multilayer Pipe & Fittings System consists of multilayer solid wall PE-RT piping and compatible fittings.

KELOX Multilayer Pipe is manufactured from of transparent raised temperature resistant polyethylene (PE-RT) inner and white outer cores and bonded to a welded aluminium central core pipe.

KELOX multilayer is manufactured in the following dimensions (d): d14, 16, 20, 25, 32, 40, 50, 63 and 75mm.

KELOX ECO has a transparent inner layer PE-RT and white outer layer PE-RT with 4 thin blue stripes.

KELOX ECO piping is manufactured in the following dimensions (d): 16, 20, 25 mm.

KE KELIT KELOX Multilayer Pipe & Fittings System includes options with factory applied insulation (4, 9 and 13mm) and jackets.

This certification includes the use of the following ranges of fittings with these pipes: PROTEC, WINDOX-U and WINDOX-W.

Fastwrap Wall Underlay is manufactured from an untra-violet (UV) light resistant, non-woven, spun-bonded polypropylene. It has a beige coloured outer surface and a white inner surface.

The certificate covers the design (engineering design and specification of escalator and moving walk componentry) and construction (manufacture and installation) of the following Schindler models: 9300, 9500 and 9700 (except moving walk Models 9500 AE Type 10 pallet width 800 and Type 30 pallet width 1400 on an accessible route). It is referred to as the Schindler methodology.

BROWNIE® Glass Mineral Wool Insulation is a non-combustible and no added formaldehyde resin bonded glass mineral wool thermal insulation material. It is supplied in blanket form (Brownie Blanket) and slab form (Brownie Slab). 

WALL – Slab Products for Ecowool BROWNIE® Glass Mineral Wool Insulation – R Value@15C

• R2.2 90mm x 0.58m x 1.14m
• R2.4 90mm x 0.58m x 1.14m
• R2.6 90mm x 0.58m x 1.14m
• R2.6 90mm x 0.58m x 1.14m

WALL – Blanket Products for Ecowool BROWNIE® Glass Mineral Wool Insulation – R Value@15C

• R1.8 75mm x 1.2m x 12m
• R2.2 90mm x 1.2m x 13
• R2.4 90mm x 1.2m x 10m
• R2.6 90mm x 1.2m x 7m
• R2.8 90mm x 1.2m x 5m
• R3.6 140mm x 1.2m x 5m

CEILING – Slab Products for Ecowool BROWNIE® Glass Mineral Wool Insulation – R Value@15C

• R3.3 145mm x 0.432m x 1.22m
• R3.6 160mm x 0.432m x 1.22m
• R4.0 180mm x 0.432m x 1.22m
• R5.0 220mm x 0.432m x 1.22m
• R6.0 230mm x 0.432m x 1.22m

CEILING – Blanket Products for Ecowool BROWNIE® Glass Mineral Wool Insulation – R Value@15C

• R2.7 120mm x 1.2m x 10m
• R2.9 130mm x 1.2m x 10m
• R3.3 145mm x 1.2m x 8.5m
• R3.6 160mm x 1.2m x 10m
• R4.0 180mm x 1.2m x 8m

MASONRY – Blanket Products for Ecowool BROWNIE® Glass Mineral Wool Insulation – R Value@15C

• R1.0 40mm x 1.2m x 30m
• R1.3 50mm x 1.2m x 15m

Katana Piles 80kN, 100kN & 150kN Series (Katana piles) are steel screw piles with capacities of 80kN, 100 kN and 150 kN utilising a proprietary designed screw thread and cutting comb.

KATANA piles are available in lengths of 1 to 4 metres, with extension, connector and capping accessories available.

Ardex WPM 195 & WPM 196 are high performance Styrene-Butadine-Styrene (sbs) bituminous compounds modified with adhesive elasto-plastomeric polymers. They are torch applied tanking membranes. WPM 196 has as a slate mineral chip finish for high adhesion to concrete, WPM 195 does not have this finish.

Strandfloor® is an engineered wood-based panel flooring material available as Strandfloor® Square-Edge and Strandfloor® Tongue & Groove, which has white polypropylene tongues. The panel flooring is suitable for up to 8 weeks exposure. All panels are ink marked on the underside with the product code, Strandfloor and a five digit traceability code.