Posted: 31 May 2017
MBIE and the NZGS have jointly released two new geotechnical engineering guidance documents as part of the Earthquake Geotechnical Engineering Practice series. This joint guidance has been published as Building Act section 175 guidance.
The two new modules are:
- Module 5: Ground improvement of soils prone to liquefaction
- Module 6: Earthquake-resistant retaining wall design
These versions are being issued for public comment. Geotechnical and structural engineers are encouraged to make use of these documents and return comments to firstname.lastname@example.org within six months for consideration by the editorial committee. Comments are also welcome from others working in earthquake engineering.
This module covers the design of ground improvement and supports the Canterbury Earthquakes Royal Commission recommendations to prepare national guidelines specifying design procedures for ground improvement, to provide more uniformity in approach and outcomes.
This module covers the seismic design of retaining walls of a routine nature throughout New Zealand and should be used in conjunction with established handbooks that cover other aspects of retaining wall design in all situations and soil conditions. It builds on and generalises the MBIE-issued supplementary guidance supporting the Canterbury rebuild seismic design of retaining structures for residential sites in Greater Christchurch with accompanying worked examples.
Geotechnical engineering education programme
An education programme supporting the release of Modules 5 and 6 will be developed and advertised in due course.
Module 3 Geotechnical education now available online
An online tutorial on ‘Identification assessment and mitigation of liquefaction hazards’ is now available on the Institution of Professional Engineers New Zealand (IPENZ) website.
You will need to register online to access the tutorial. Viewing the presentation and undertaking the related quiz can be claimed as Continuing Professional Development (CPD) hours.
This learning resource on Module 3 of the Earthquake Geotechnical Engineering Practice series is available free to all geotechnical professionals. It is part of a joint education initiative between MBIE, IPENZ and the NZGS to run over several years.
Upcoming geotechnical education for Rockfall: Design considerations for passive protection structures
An online tutorial will soon be available on the IPENZ learning webpage, providing instruction on the design of passive rockfall protection structures that act to reduce the effects of falling rock on people and/or infrastructure. The tutorial will be available free to all geotechnical professionals.
Rockfall: Design considerations for passive protection structures is joint guidance published by MBIE, the NZGS and the New Zealand Transport Agency.
New field guide for rapid post disaster building usability assessment – geotechnical
MBIE has published a field guide to accompany two existing field guides for post disaster building assessments for earthquakes and for flooding.
This Field Guide: Rapid Post Disaster – Geotechnical assessment toward building usability has been produced to assist geotechnical professionals in the assessment and categorisation of land instability in conjunction with a rapid building assessment process during a State of Emergency or during a lesser event in special circumstances. The field guide contains a standard field data collection form to be used during geotechnical rapid building assessment.
The geotechnical component of a rapid building assessment process involves the rapid assessment of the impacts of land instability on commercial, industrial and residential buildings that could affect the safety of people. This is the third in a series of field guides that target a uniform approach to rapid building assessment.