Skip to main content Skip to search Skip to primary navigation
Building Performance
Site search

Popular searches

  1. Why contracts are valuable
    Consumer protection measures
  2. Use licensed people for restricted building work
    Choosing the right people for your type of building work
  3. Work that doesn't require a building consent
    Schedule 1 guidance
  4. Post-emergency building assessment
  5. Determinations
    Rulings on building work disputes
  6. E2 External moisture
    Acceptable Solutions and Verification Methods
 
Menu Search

Pile design options for shallow depths of liquefaction

 

Pile design options for shallow depths of liquefaction[PDF 552 KB]

Supplementary guidance to ‘Guidance on repairing and rebuilding houses affected by the Canterbury earthquakes’.

About this document

  • Published on 6 September 2013
  • Of interest to Builders, Designers,
  • 1st edition

Introduction

This is a detailed explanation of the simplified procedure for assessing kinematic pile strains for TC3 residential sites in Christchurch.

Repairing and rebuilding houses affected by the Canterbury earthquakes supplementary guidance. 

 

Top

This information is published by the Ministry of Business, Innovation and Employment’s Chief Executive. It is a general guide only and, if used, does not relieve any person of the obligation to consider any matter to which the information relates according to the circumstances of the particular case. Expert advice may be required in specific circumstances. Where this information relates to assisting people: